全国咨询热线
全国咨询热线
| 编号 | 中文名称 | 英文名称 |
| GB 18145-2003 | 陶瓷片密封水嘴 | Ceramic cartridge faucets |
| GB/T 8375-1987 | 水嘴分类、型号命名方法 | Classification and type nomenclature for taps |
| ANSI/ASAE S436.1-1997 | 装有喷雾器和喷嘴的中心旋转轴、弯头旋转轴和横向移动的灌溉机喷水均匀性测定试验程序 | Test Procedure for Determining the Uniformity of Water Distribution of Center Pivot, Corner Pivot, and Moving Lateral Irrigation Machines Equipped with Spray or Sprinkler Nozzles |
| ANSI/ASME MFC-3M-1-2004 | 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第1部分:总则 | Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General |
| ANSI/ASME MFC-3M-2-2004 | 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第2部分:孔板 | Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates |
| ANSI/ASME MFC-3M-3-2004 | 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第3部分:喷嘴和文杜利喷嘴 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles |
| ANSI/ASME MFC-3M-4-2004 | 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第4部分:文杜利流量计 | Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters |
| ANSI/ASME MFC-7M-1987 | 利用临界文氏流量喷嘴测量气体流量 | Gas Flow by Means of Critical Flow Venturi Nozzles, Measurement of |
| ANSI/ASTM F1601-2001 | 中央真空吸尘系统家用电动管嘴马达寿命评估试验方法 | Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System |
| ANSI/ASTM F1692-2001 | 家庭中央真空吸尘系统涡轮动力喷嘴寿命评估试验方法 | Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ANSI/AWS C4.5M-2006 | 氧化燃料喷嘴的统一命名系统 | Uniform Designation System for Oxyfuel Nozzles |
| ANSI/AWWA C708-2005 | 多喷嘴式冷水表 | Cold-Water Meters - Multijet Type |
| ANSI/HI 9.6.2-2001 | 离心泵和立式泵.好大喷嘴负荷 | Centrifugal and Vertical Pumps for Allowable Nozzle Loads |
| ANSI/NFPA 1962-2003 | 消防水龙带包括接头和喷嘴的保养、使用和维修试验 | Care, Use, and Service Testing of Fire Hose, Including Couplings and Nozzles |
| ANSI/NFPA 1964-2003 | 喷嘴(关闭阀和端头) | Spray Nozzles (Shutoff and Tip) |
| ANSI/UL 2167-2004 | 消防设备用水雾喷嘴的安全标准 | Standard for Safety for Water Mist Nozzles for Fire-Protection Service |
| ANSI/UL 2351-2004 | 防火用喷嘴的安全标准 | Standard for Safety for Spray Nozzles for Fire-Protection Service |
| ANSI/UL 401-2004 | 防火服务用便携式喷雾软管喷嘴的安全标准 | Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service (bulletin dated February 16, 2004) |
| ASME MFC-7M-1987 | 用大限流量文氏喷嘴测量气体流量 | (Measurement of gas flow by means of critical flow Venturi nozzles) |
| ASTM C 605-1992 | 耐火粘土制喷嘴和套管的二次加热变化的试验方法 | Test Method for Reheat Change of Fireclay Nozzles and Sleeves |
| ASTM E 641-2001 | 农用液压喷嘴的试验的标准方法 | Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture |
| ASTM F 1413-1992 | 漏油分散设备:起重臂和喷油嘴系统 | Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems |
| ASTM F 1460-1993 | 溢油分散剂喷洒设备喷杆和喷嘴系统校准的标准规范 | Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems |
| BS 1486-1-1959 | 润滑脂管嘴.第1部分:机械与车辆用润滑脂管嘴和适配器 | Lubricating nipples - Lubricating nipples and adaptors for use on machinery and vehicles |
| BS 1486-2-1961 | 润滑脂管嘴.重型润滑脂管嘴 | Lubricating nipples - Heavy duty lubricating nipples |
| BS 1486-4-1981 | 润滑脂管嘴规范.第4部分:液压润滑脂管嘴规范 | Lubricating nipples - Specification for hydraulic grease nipples |
| BS 2C 13-1988 | 飞机重力灌注燃油口及相关供燃油嘴的尺寸规范(米制系列) | Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series) |
| BS 5041-1-1987 | 消防栓系统设备.第1部分:湿式水嘴接地阀规范 | Fire hydrant systems equipment - Specification for landing valves for wet risers |
| BS 5041-2-1987 | 消防栓系统设备.第2部分:干式水嘴接地阀规范 | Fire hydrant systems equipment - Specification for landing valves for dry risers |
| BS 5041-4-1975 | 消防栓系统设备.第4部分:干式水嘴用接地阀箱规范 | Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers |
| BS 5041-5-1974 | 消防栓系统设备.第5部分:泡沫入口及干式水嘴用箱规范 | Fire hydrant systems equipment - Specification for boxes for foam inlets and dry riser inlets |
| BS 6356-1-1997 | 农作物防护用喷雾设备.第1部分:喷嘴试验方法 | Spraying equipment for crop protection - Method of test for sprayer nozzles |
| BS 6356-13-1997 | 农作物保护喷雾设备.第13部分:气动喷雾器:喷嘴旋轴螺母尺寸 | Spraying equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts |
| BS 6356-2-1985 | 农作物防护用喷雾设备.第2部分:喷嘴与压力计连接尺寸规范 | Spraying equipment for crop protection - Specification for connecting dimensions for nozzles and manometers |
| BS 6356-4-1989 | 农作物保护用喷雾设备.第4部分:田间喷嘴性能大限规范 | Spraying equipment for crop protection - Specification for performance limits for field spraying nozzles |
| BS 6356-6-1992 | 农作物保护用喷雾设备.第6部分:带插接固定装置喷嘴连接尺寸规范 | Spraying equipment for crop protection - Specification for connecting dimensions for nozzles with bayonet fixing |
| BS 6913-13-1997 | 运土机械的操作和维修.润滑油配件规范.油嘴类型 | Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Nipple type |
| BS 6913-14-1997 | 运土机械的操作和维修.润滑油配件规范.注油抢喷嘴 | Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Grease-gun nozzles |
| BS EN 12067-1-1999 | 燃气喷嘴和燃气装置用燃气/空气混合调节器.第1部分:气动结构类型 | Gas/air ratio controls for gas burners and gas burning appliances - Pneumatic types |
| BS EN 12094-7-2001 | 固定消防系统.气体灭火系统元件.CO2系统用喷嘴的要求和试验方法 | Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for nozzles for CO2 systems |
| BS EN 13079-2003 | 防饮用水回流造成污染的设备.有喷嘴的气隙.A类.D型 | Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A. Type D |
| BS EN 13760-2003 | 轻型和重型车辆用机动车液化石油气填充系统.喷油嘴试验要求和尺寸 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
| BS EN 293-1992 | 油压力雾化喷嘴.好低要求.试验 | Specification for oil pressure atomizing nozzles - Minimum requirements - Testing |
| BS EN 299-1999 | 油压雾化喷嘴.角度和喷射特性的测定 | Oil pressure atomizing nozzles - Determination of the angle and spray characteristics |
| BS EN 303-6-2000 | 供暖锅炉.带强制通风燃烧嘴器的供暖锅炉.标称热输入量不超过70kw的用雾化油燃烧炉的组合式锅炉的家用热水供 | Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW |
| BS EN 303-6-2000 | 供暖锅炉.带强制通风燃烧嘴器的供暖锅炉.标称热输入量不超过70kw的用雾化油燃烧炉的组合式锅炉的家用热水供 | Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW |
| BS EN 625-1996 | 装有常压送风喷嘴的燃气集中供暖锅炉.公称热输入量不超过70kW的混合锅炉的家庭热水供暖的具体要求 | Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW |
| BS EN ISO 11545-2001 | 农业灌溉设备.有喷嘴或喷雾咀的横向移动排灌机械和中心轴.水分配均匀性的测定 | Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution |
| BS EN ISO 15029-1-2000 | 石油和相关产品.耐火液体喷射点燃特性的测定.喷射火焰持久性.空心锥形喷嘴法 | Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Spray flame persistence - Hollow-cone nozzle method |
| BS EN ISO 20844-2004 | 石油和相关产品.使用柴油注射器喷嘴测定含聚合物油的剪切稳定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| BS EN ISO 5167-3-2003 | 用插入圆截面管道中的压差装置测量流体流量.喷嘴和文杜利喷嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Nozzles and Venturi nozzles |
| BS EN ISO 9300-2005 | 用临界流量文丘里喷嘴测定气体流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| BS G 175-1959 | 航空用燃油嘴接地插头和插座 | Aircraft fuel nozzle grounding plugs and sockets |
| BS ISO 14681-1998 | 柴油发动机.燃料喷射泵试验.燃料喷嘴的校准 | Diesel engines - Fuel injection pump testing - Calibrating fuel injectors |
| BS ISO 2697-2000 | 柴油发动机.燃料喷嘴."S"尺寸 | Diesel engines - Fuel nozzles - Size "S" |
| BS ISO 4010-1998 | 柴油发动机.针栓型滞后校准喷嘴 | Diesel engines - Calibrating nozzle, delay pintle type |
| BS ISO 7026-1998 | 柴油发动机.S1规格B型针栓式喷嘴的20、21、21.1和27型拧入式喷嘴固定器 | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B' |
| BS ISO 9102-1998 | 柴油发动机.24、25、26和26.1型拧入式喷嘴底座 | Diesel engines - Screw-in injection nozzle holders types 24, 25, 26 and 26.1 |
| BS ISO TR 15377-1998 | 用压差装置测量流体流量.ISO 5167-1规定范围之外的喷嘴和节流孔板规范指南 | Measurement of fluid flow by means of pressure differential devices - Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1 |
| DD ENV 1259-1-1994 | 燃气式单喷嘴装于大大部的幅射管加热器和非家用燃气式装于大大部的发光幅射加热器.制定合理使用能源的要求和试 | Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method A |
| DD ENV 1259-2-1997 | 燃气式单喷嘴装于大大部的幅射管加热器和非家用燃气式装于大大部的发光幅射加热器.建立合理使用能源的要求和试 | Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method B |
| DD ENV 1259-3-1997 | 燃气式单喷嘴装于大大部的辐射管加热器和非家用燃气式装于大大部的发光辐射加热器.建立合理使用能源的要求和试 | Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method C |
| DIN 11210-1982 | 农业机械.带式喷雾器.喷嘴支架的连接尺寸 | Agricultural machinery; band sprayer; connection dimensions for nozzleholders |
| DIN 11215-1978 | 农业机械.农作物保护喷雾器.喷嘴的连接尺寸 | Agricultural machinery; sprayers for crop protection, connection dimensions for nozzles |
| DIN 12898-1992 | 实验室用水管龙头.出水嘴 | Laboratory taps; outlet nozzles |
| DIN 14200-1979 | 喷嘴排放 | Nozzle discharge |
| DIN 14494-1979 | 开式喷嘴固定式喷水系统 | Water spray systems, fixed, with open nozzles |
| DIN 16966-4-1982 | 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.三通喷管嘴尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions |
| DIN 20033-1990 | 软管连接件.带压紧螺母的锥形管嘴 | Hose fittings; tapered nozzle with clamping nut |
| DIN 20035-1990 | 软管管接头.法兰管嘴.公称压力16 | Hose fittings; flange nozzle; nominal pressure 16 |
| DIN 20038-1990 | 软管管接头.接头管嘴 | Hose fittings; coupling nozzles |
| DIN 24375-1981 | 表面处理.无气喷枪的扁形喷嘴.尺寸、测试、标记 | Surface treatment; flat-stream nozzles for airless spray guns; dimensions, testing, marking |
| DIN 25480-1-1987 | 污染防护箱用元件.喷嘴、远距离操作钳用环.窗和支柱系统 | Components for contamination protection boxes; nozzles, rings for remote handling tongs, windows and posting systems |
| DIN 28025-2003 | 不锈钢喷嘴.PN 10 至 PN 40 | Nozzles of stainless steel - PN 10 to PN 40 |
| DIN 28115-2003 | 碳钢喷嘴.PN 10 至 PN 40 | Carbon steel nozzles - PN 10 to PN 40 |
| DIN 28136-11-1989 | 搅拌器.第11部分:玻璃纤维衬里的 CE 型公称容量为 4000 升更换用刚制搅拌器大大盖喷嘴的位置和尺寸 | Agitator vessels; position and sizes of cover nozzles for glass lined steel agitator vessels, type CE, with a nominal volume of 4000 litres for replacement purposes |
| DIN 28136-14-1999 | 搅拌容器.第14部分:BE型d1=2400-3600mm的搪玻璃钢搅拌容器用盖喷嘴的位置和大小, CE型d1=2400-3600mm的搪 | Agitator vessels - Part 14: Position and sizes of cover nozzles for glass lined steel agitator vessels, position H for vessels form BE with d<(Index)1> = 2400 mm to 3600 mm and position K for vessels form CE with d<(Index)1> = 2400 mm to 3600 mm; inactive for new design |
| DIN 28136-2-2005 | 搅拌容器.第2部分:非合金和不锈钢容器大大盖喷嘴的位置和尺寸 | Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels |
| DIN 28136-3-2005 | 搅拌容器.第3部分:搪玻璃钢件搅拌容器大大盖喷嘴的位置和尺寸 | Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels |
| DIN 28139-3-1985 | 搪瓷容器的焊接凸肩.分离式搭接法兰连接用S形接管嘴.连接尺寸 | Welding necks for glass lined vessels; form S nozzles for lapped divided flange connections; connecting dimensions |
| DIN 28151-1999 | 钢制搪玻璃搅拌容器用套管喷嘴.喷嘴位置 | Nozzles of jacket on agitated vessels, of glass lined steel - Position of nozzles |
| DIN 29736-2-1989 | 航空航天.燃料喷嘴接地插头和插座.技术规范 | Aerospace; fuel nozzle grounding plugs and sockets; technical specification |
| DIN 3404-1988 | 扁平注油嘴 | Lubricating nipples; button head |
| DIN 3405-1986 | 杯形润滑油嘴 | Lubricating nipples cupped type |
| DIN 3410-1974 | 润滑油排出管嘴.总尺寸和装配尺寸 | Lubricating nipples; overall and fitting dimensions |
| DIN 3528-1986 | 煤气装置用阀门.带密封垫的喷嘴 | Valves for gas installations; nozzles with gasket |
| DIN 45635-25-1980 | 机器排放的空气传播噪声的测量.第25部分:包洛面法.气焊及等离子焊喷嘴和机器 | Measurement of airborne noise emitted by machines; enveloping surface method, oxy-fuel gas and plasma torches and machines |
| DIN 4661-4-1968 | 压缩气瓶.第4部分:焊接钢气瓶喷嘴 | Gas cylinders, welded steel gas cylinders; nozzles |
| DIN 5042-7-1988 | 燃气灯和煤气灯.第7部分:固定喷嘴 | Combustion lamps and gas luminaires; fixed nozzles |
| DIN 5059-1-1992 | 包装.金属和塑料管.金属管.管嘴、管肩 | Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders |
| DIN 5059-2-1990 | 包装.金属和塑料管.塑料管.管嘴 | Packaging; metal and plastic tubes; plastic tubes; tube nozzles |
| DIN 71412-1987 | 锥形润滑剂注油嘴 | Lubricating nipples; cone type |
| DIN 73372-1978 | 规格T and U 喷油嘴 | Fuel injection nozzles, size T and U |
| DIN 7584-1980 | 家用安装水管配件.压力为10巴的平密封垫带外螺纹的钢管接管嘴 | Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar |
| DIN 7588-1994 | 家装设备用水管配件.平密封螺旋接头.压力10巴的一端带内螺纹,另一端带钢管喷嘴、铜管喷嘴或套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7589-1994 | 家装设备用水管配件.平密封螺旋接头.压力10巴的一端带外螺纹,另一端带钢管喷嘴、铜管喷嘴和套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7592-1981 | 家用安装水管配件.标称工作压力为10巴以下的铜管管嘴 | Water-fittings for house installation; copper tube nozzles up to working pressure of 10 bar |
| DIN 8535-1970 | 气动工具.螺纹管嘴 | Pneumatic tools, screw nozzle tips |
| DIN 8536-1970 | 气动工具.转接管嘴 | Pneumatic tools; transition nozzle tips |
| DIN 8537-1970 | 气动工具.锥形喷气管嘴、连接螺母、连接管 | Pneumatic tools; cone nozzle tips, connection nuts, connection nipples |
| DIN EN 12094-7-2005 | 固定式消防系统.气体灭火系统用元件.第7部分:CO2系统用喷嘴的要求和试验方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO<(Index)2> systems; German version EN 12094-7:2000 + A1:2005 |
| DIN EN 13079-2003 | 防饮用水回流污染的装置.有喷嘴的气隙.A系列D型 | Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A; Type D; German version EN 13079:2003 |
| DIN EN 13760-2003 | 轻型和重型车辆用汽车液化石油气灌充设备.喷嘴的试验要求和尺寸 | Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions; German version EN 13760:2003 |
| DIN EN 14979-2006 | 包装.软塑料/金属层压管.S13喷嘴的尺寸和公差 | Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13; German version EN 14979:2006 |
| DIN EN 293-1992 | 油压喷雾器喷嘴.好低要求.试验 | Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992 |
| DIN EN ISO 5167-3-2004 | 用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003 |
| DIN EN ISO 9300-2005 | 用文杜利临界流量喷嘴测量气体流量 | Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005); German version EN ISO 9300:2005 |
| DIN ISO 14710-1999 | 农用机械和拖拉机.作物保护设备.空气辅助的喷洒器.喷嘴旋转螺母的尺寸 | Agricultural machinery and tractors - Equipment for crop protection - Air-assisted sprayers; dimensions of nozzle swivel-nuts (ISO 14710:1996) |
| DIN ISO 2698-1995 | 柴油发动机.夹紧式燃油喷嘴.7 型和 28 型; 等同采用 ISO 2698:1993 | Diesel engines - Clamp-mounted fuel injectors, types 7 and 28; identical with ISO 2698:1993 |
| DIN ISO 4010-1978 | 道路车辆.延迟针阀式标定喷嘴 | Calibrating Nozzle, Delay Pintle Type |
| DIN ISO 413-1987 | 航空航天.润滑油加油管嘴头 | Aircraft; heads of lubricating nipples; identical with ISO 413, edition 1974 |
| DIN ISO 5682-1-1999 | 农用机械和拖拉机.农作物防护设备.第1部分:喷洒器喷嘴的试验方法 | Agricultural machinery and tractors - Equipment for crop protection - Part 1: Test methods for sprayer nozzles (ISO 5682-1:1996) |
| DIN ISO 7026-1992 | 道路车辆.B类S规格的针式喷嘴用的20、21和27型螺丝拧入式喷嘴架 | Road vehicles; screw-in injection nozzle holders types 20, 21 and 27 for pintle nozzle size "S", type "B"; identical with ISO 7026:1990 |
| DIN ISO 7030-1988 | 道路车辆.12，13，14，15，16，17，18 和19 型 螺旋拧入式喷嘴固定架 | Road vehicles; screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19; identical with ISO 7030:1987 |
| DIN ISO 8356-1985 | 道路车辆.柴油发动机.22型螺旋拧入式喷油嘴 | Road vehicles; diesel engines; screw-in injector; type 22; identical with ISO 8356, edition 1984 |
| DIN ISO 9102-1992 | 道路车辆.压燃式发动机.24.25.26型螺丝拧入式喷嘴座 | Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990 |
| DIN ISO 9158-1989 | 道路车辆.无铅汽油用管嘴 | Road vehicles; nozzle spouts for unleaded gasoline; identical with ISO 9158:1988 |
| DIN ISO 9159-1989 | 道路车辆.含铅汽油和柴油用管嘴 | Road vehicles; nozzle spouts for leaded gasoline and diesel fuel; identical with ISO 9159:1988 |
| DIN V ENV 1259-2-1997 | 单喷嘴燃气大大部辐射管加热器和商用燃气大大部发光辐射加热器.第2部分:确定合理能耗的要求及试验方法.辐射计法 | Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 2: Requirements and test methods for establishing the rational use of energy; radiometric method B; German version ENV 1259-2:1996 |
| DIN V ENV 1259-3-1997 | 单喷嘴燃气大大部辐射管加热器和商用燃气大大部发光辐射加热器.第3部分:确定合理能耗的要求及试验方法.辐射计法 | Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 3: Requirements and test methods for establishing the rational use of energy; radiometric method C; German version ENV 1259-3:1996 |
| EN 12067-1-1998+A1-2003 | 燃气喷嘴和燃气装置用燃气/空气混合调节器 第1部分：气动型 | Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types |
| EN 12094-7-2000 | 固定式消防系统 气体灭火系统的部件 第7部分：对CO2系统的喷嘴的要求及试验方法 | Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO<(Index)2> systems |
| EN 13012-2001 | 加油站 加油机上使用的自动喷嘴的结构和性能 | Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers |
| EN 13760-2003 | 轻型和重型机动车辆用液化石油气填充系统 喷油嘴试验要求和尺寸 | Automative LPG filing system for light and heavy duty vehicles - Nozzle, test requirements and dimensions |
| EN 293-1992 | 油压喷雾喷嘴 好低要求 测试 | Oil pressure atomizing nozzles; minimum requirements; testing |
| EN 299-1998 | 油压喷雾喷嘴 角度和喷雾特性的测定 | Oil pressure atomizing nozzles - Determination of the angle and spray characteristics |
| EN ISO 11545-2001 | 农业排灌设备 有喷嘴和喷雾嘴的横向移动排灌机械和中心轴 分配水的均匀性的测定 | Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2001) |
| EN ISO 15029-1-1999 | 石油和相关产品 难燃液体喷射燃烧特性的测定 第1部分：喷流燃烧持久度 空锥喷嘴法 | Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999) |
| EN ISO 5167-1-2003 | 用压差装置测量流体流量 第1部分：圆截面管道中插入的节流孔板、喷嘴和文杜利管 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| EN ISO 5167-3-2003 | 圆截面管道中用压差装置测量流体流量 第3部分：喷嘴和文杜利喷嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) |
| EN ISO 9300-1995 | 用文杜利临界流量喷嘴测定气体流量 | Measurement of gas flow means of critical flow Venturi nozzles (ISO 9300:1990) |
| GB 796-1989 | 卤代烷灭火系统喷嘴性能要求和试验方法 | Halon fire extinguishing systems--Performance requirements and method of test for nozzles |
| GB/T 19230.3-2003 | 评价汽油清净剂使用效果的试验方法第3部分: 汽油清净剂对电子孔式燃油喷嘴(PFI)堵塞倾向影响的试验方法 | Test method for evaluating gasoline detergent in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel injector(PFI) fouling |
| GB/T 2624.3-2006 | 用安装在圆形截面管道中的差压装置测量满管流体流量 第3部分：喷嘴和文丘里喷嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles |
| GB/T 5772-1986 | 柴油机喷油嘴偶件技术条件 | Technical specification for fuel injection nozzles of diesel engines |
| HG/T 3144-1984 | 小容量内混式蒸汽雾化轻质油烧嘴 | () |
| HG/T 3144-1984 | 小容量内混式蒸汽雾化轻质油烧嘴 | () |
| HG/T 3168-1986 | 油喷嘴性能试验方法 | () |
| ISO 10626-1991 | 作物保护设备 喷雾器 卡口安装的喷嘴连接尺寸 | Equipment for crop protection; sprayers; connecting dimensions for nozzles with bayonet fixing |
| ISO 11545-2001 | 农业排灌设备 有喷嘴和喷雾嘴的横向移动排灌机械和中心轴 分配水的均匀性的测定 | Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution |
| ISO 14710-1996 | 作物保护设备 空气引射喷雾器 喷嘴旋转螺母的尺寸 | Equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts |
| ISO 15029-1-1999 | 石油和相关产品 难燃液体喷射燃烧特性的测定 第1部分:喷流燃烧持久度 空锥喷嘴法 | Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method |
| ISO 20844-2004 | 石油和相关产品.用柴油喷射器喷嘴测定含高聚物油的剪切稳定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
| ISO 2699-1994 | 柴油机 法兰安装式“S”号喷油嘴 2、3、4、5和6型 | Diesel engines; flange-mounted fuel injectors, size "S"; types 2, 3, 4, 5 and 6 |
| ISO 413-1974 | 航空器 润滑油加油管嘴的头部 | Aircraft; Heads of lubricating nipples |
| ISO 46-1973 | 航空器 燃油管嘴接地插头和插座 | Aircraft; Fuel nozzle grounding plugs and sockets |
| ISO 5167-1 Technical Corrigendum 1-1997 | 用压差装置测量流体流量 第1部分:圆截面管道中插入的节流孔板、喷嘴和文杜利管 技术勘误1 | Measurement of fluid flow by means of pressure differential devices - Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full - Technical Corrigendum 1 |
| ISO 5167-3-2003 | 用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles |
| ISO 5176-1-1991 | 用压差装置测量流体流量.第1部分:圆截面管道中插入的节流孔板、喷嘴和文杜利管 | Measurement of fluid flow by means of pressure differential devices; part 1: orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full |
| ISO 5682-1-1996 | 作物保护设备 喷雾设备 第1部分:喷雾机喷嘴的试验方法 | Equipment for crop protection - Spraying equipment - Part 1: Test methods for sprayer nozzles |
| ISO 6182-9-2005 | 消防.自动喷水灭火系统.第9部分:水雾喷嘴的要求和试验方法 | Fire protection - Automatic sprinkler system - Part 9: Requirements and test methods for water mist nozzles |
| ISO 6392-2-1996 | 土方机械 润滑件 第2部分:黄油枪喷嘴 | Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles |
| ISO 7026-1997 | 柴油机 S尺寸轴针式喷油嘴偶件B型拧入式喷嘴器件(20、21、21.1和27型) | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" |
| ISO 7026-1997 | 柴油机 S尺寸轴针式喷油嘴偶件B型拧入式喷嘴器件(20、21、21.1和27型) | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" |
| ISO 7030-1987 | 道路车辆 12、13、14、15、16、17、18和19型螺旋拧入式喷嘴器件 | Road vehicles; Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 |
| ISO 7824-1986 | 造船及海上结构物 润滑油嘴 锥型及平肩型 | Shipbuilding and marine structures; Lubrication nipples; Cone and flat types |
| ISO 8169-1984 | 作物保护设备 喷雾器 喷嘴和压力计的连接尺寸 | Equipment for crop protection; Sprayers; Connecting dimensions for nozzles and manometers |
| ISO 9158-1988 | 道路车辆 无铅汽油用管嘴 | Road vehicles; nozzle spouts for unleaded gasoline |
| ISO 9159-1988 | 道路车辆 含铅汽油和柴油用管嘴 | Road vehicles; nozzle spouts for leaded gasoline and diesel fuel |
| ISO 9300-2005 | 用临界流量文丘里喷嘴测定气体流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| ISO/TR 15377 Technical Corrigendum 1-1999 | 用压差装置测量流体流量 符合ISO 5167-1规定的喷嘴和节流孔板规范指南 技术勘误1 | Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1; Technical Corrigendum 1 |
| ISO/TR 15377-1998 | 用压差装置测量流体流量 符合ISO 5167-1规定的喷嘴和节流孔板规范指南 | Measurement of fluid flow by means of pressure-differential devices - Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1 |
| JB/T 10645-2006 | 碳化硅特种制品 氮化硅结合碳化硅 烧嘴套 | Special products of silicon carbide-Silicon nitride bonded silicon carbide-Nozzle tubes |
| JB/T 10645-2006 | 碳化硅特种制品 氮化硅结合碳化硅 烧嘴套 | Special products of silicon carbide-Silicon nitride bonded silicon carbide-Nozzle tubes |
| JB/T 10697-2007 | 碳化硅特种制品 反应烧结碳化硅 烧嘴套 | () |
| JB/T 10697-2007 | 碳化硅特种制品 反应烧结碳化硅 烧嘴套 | () |
| JB/T 51184-2000 | 喷油嘴偶件可靠性考核 评定方法、台架试验方法及失效判定 | () |
| JB/T 5174-2005 | 喷油嘴偶件 型式及连接尺寸 | () |
| JB/T 7296-2004 | 柴油机喷油嘴偶件 技术条件 | () |
| JB/T 7297-2004 | 柴油机喷油嘴偶件 性能试验方法 | () |
| JB/T 7661-2004 | 柴油机油泵油嘴产品清洁度 限值及测定方法 | () |
| JB/T 8604-1997 | 气动小喷嘴式内径测量装置 | () |
| JB/T 8650.4-1997 | 机床冷却系统辅件 喷嘴 | () |
| JB/T 9729-1999 | 柴油机喷油泵柱塞偶件、出油阀偶件、喷油嘴偶件径部密封值样品 技术条件 | () |
| JB/T 9730-1999 | 柴油机喷油嘴偶件、喷油泵柱塞偶件、喷油泵出油阀偶件 金相检验 | () |
| JB/T 9732-1999 | 轴针式标准喷油嘴偶件 | () |
| JB/T 9736-1999 | 喷油嘴偶件、柱塞偶件、出油阀偶件 磁粉探伤方法 | () |
| JC/T 1043-2007 | 水嘴铅析出限量 | Limit of lead extraction in faucets |
| JIS B1575-2000 |
油脂枪喷嘴 グリースニップル |
Grease nipples |
| JIS B1575 ERRATUM 1-2001 | 油脂枪喷嘴(勘误1) | (Erratum 1) |
| JIS B9913-1972 |
消防用喷嘴连接件的分类及尺寸 消防用ノズルチップの結合部の種類および寸法 |
Classification and dimensions of connections for fire department nozzle-tips |
| JIS D2502-1991 |
汽车用散热器的压盖和接管嘴 自動車用ラジエータのプレッシャキャップ及びフィラネック |
Pressure caps and filler necks for automobile radiators |
| JIS D3604-1998 | 道路车辆.柴油发动机用燃油喷嘴的形状及尺寸."S" 规格 | Road vehicles -- Shapes and dimension of fuel injection nozzles for diesel engines -- Size "S" |
| JIS D3631-1998 | 道路车辆.柴油发动机用燃油喷嘴支架的形状及尺寸."S" 规格 | Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "S" |
| JIS D3632-1999 | 道路车辆.柴油机燃油喷嘴体的形状和尺寸.规格P | Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "P" |
| JIS D3636-2003 | 道路车辆.柴油机燃料喷射泵试验.枢轴型校准喷嘴 | Road vehicles -- Diesel fuel injection equipment testing -- Pintle type calibrating nozzle |
| JIS D3637-1-2003 | 道路车辆.柴油喷射设备试验.第1部分:校准喷嘴和固定器组件 | Road vehicles -- Diesel fuel injection equipment testing -- Part 1: Calibrating nozzle and holder assemblies |
| JIS Z8767-2006 | 用临界流量文丘里喷嘴测定气体流量 | Measurement of gas flow by means of critical flow Venturi nozzles |
| MT/T 662-1997(2005) | 滚筒采煤机喷雾降尘用喷嘴基本尺寸 | () |
| NF E31-302-1976 | 流量小于或等于200kg/小时家用燃料油自动喷嘴 | (Automatic sprayer burners for domestic fuel oil with a flow rate of up to 200 kg/H.) |
| NF E31-319-1992 | 油压雾化喷嘴.好低要求.试验 | (OIL PRESSURE ATOMIZING NOZZLES. MINIMUM REQUIREMENTS. TESTING. (EUROPEAN STANDARD EN 293).) |
| NF E31-320-1999 | 油压自动喷嘴.角度和喷射特性的测定(欧洲标准EN299) | (Oil pressure atomizing nozzles. Determination of the angle and spray characteristics.) |
| NF E31-354-1-1999 | 供暖锅炉.第1部分:压力送风喷嘴式供暖锅炉.术语、一般要求、试验和标志 | (Heating boilers. Part 1 : heating boilers with forced draught burners. Terminology, general requirements, testing and marking.) |
| NF L94-111-1975 | 飞机地面注油管喷嘴的插头和插座 | (Aircraft . Fuel nozzle grounding plugs and sockets.) |
| NF R16-319-2003 | 道路车辆.B型、S规格轴针式喷油嘴用20、21、21.1和27型旋入式喷油嘴保持座 | (Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size “S“, type “B“.) |
| NF R16-331-1986 | 道路车辆.柴油发动机.22型螺栓固定的喷嘴 | (ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.) |
| NF R16-332-1-1993 | 道路车辆.燃料喷射设备的试验.第1部分:喷嘴检验及支架装置 | (Road vehicles. Fuel injection equipment testing. Part 1 : calibrating nozzle and holder assemblies.) |
| NF R16-335-1989 | 道路车辆.压燃式发动机.拧入式喷嘴座,23型 | (ROAD VEHICLES. COMPRESSION-IGNITION ENGINES. SCREW-IN INJECTION NOZZLE HOLDER,TYPE 23.) |
| NF R16-340-2003 | 柴油发动机.24、25和26和26.1型旋入式喷嘴保持座 | (Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1.) |
| NF S61-820-2001 | 消防和救援设备.消防用手控喷水嘴 | (Firefighting and rescue service equipment - Hand-held nozzles for firefighting.) |
| NF S62-137-2001 | 固定式消防系统.气体灭火系统用元件.第7部分:CO2系统喷嘴的要求和试验方法 | (Fixed firefighting systems - Components for gas extinguishing systems - Part 7 : requirements and test methods for nozzles for CO2 systems.) |
| NF T51-075-1986 | 塑料.燃烧特性.针状喷嘴试验 | (Plastics. Fire behaviour. Needle burner test.) |
| NF T77-106-1987 | 工业硅树脂.粘度、挤压度（流动率）和ＣＡＳＳＯＮ粘度的测定.标准挤压喷嘴法 | (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF EXTRUDABILITY (FLUIDITY) AND OF VISCOSITY “CASSON“. METHOD USING STANDARD EXTRUSION NOZZLE.) |
| NF U26-132-1985 | 植物保护装置.农药喷洒机具.喷雾器.喷嘴和压力计的连接尺寸 | (EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTING DIMENSIONS FOR NOZZLES AND MANOMETERS.) |
| NF U26-134-1992 | 农作物保护设备.喷雾机械.卡口固定喷嘴连接尺寸 | (EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTING DIMENSIONS FOR NOZZLES WITH BAYONET FIXING.) |
| NF U26-136-1997 | 作物保护设备.空气喷雾机械.喷嘴旋转螺母的尺寸 | (EQUIPMENT FOR CROP PROTECTION. AIR-ASSISTED SPRAYERS. DIMENSIONS OF NOZZLE SWIVEL NUTS.) |
| NF X10-102-3-2003 | 用插入圆截面管道中的压差装置测量流体流量.第3部分:喷嘴和文杜利喷嘴 | (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3 : nozzles and Venturi nozzles.) |
| QB 1334-2004 | 水嘴通用技术条件 | () |
| QB 2806-2006 | 温控水嘴 | Thermostatic faucets |
| QB/T 3895-1999 | 旋塞式热水嘴 | Pluged hot-Water taps |
| SH/T 0103-2007 | 含聚合物油剪切安定性的测定 柴油喷嘴法 | Standard test method for shear stability of polymer containing fluids using a european diesel injector apparatus |
| SH/T 0764-2005 | 柴油机喷嘴结焦试验方法（XUD-9法） | () |
| SY/T 5906-2003 | 配水嘴嘴损曲线图版制作方法 | () |
| UL 2351-2000 | 防火设施用喷嘴 | (Spray nozzles for fire-protection service ) |
| YB/T 4087-1982(2005) | 冶金喷嘴 | () |
| prEN 12067-2-2001 | 燃气喷嘴和燃气装置用燃气/空气混合调节器 第2部分：电子型 | Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types |
| prEN 12881-1-1997 | 传输带 燃烧模拟法可燃性试验 第1部分：两米单喷嘴丙烷坑道试验 | Conveyor belts - Fire simulation flammability testing - Part 1: Two metre single burner propane gallery test |
| prEN 3908-1999 | 航空航天系列 钝化耐腐蚀钢润滑轴向喷嘴 | Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| prEN ISO 20844-2002 | 石油及石油产品 用柴油机喷嘴测定含聚合物油类的剪切稳定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002) |
【喷雾系统】人造雾|雾森系统 - 北京澳门太阳集团城网址8722环保设备有限公司
微信二维码
微信号：Copyright © 2002-2023 KeFeng. 澳门太阳集团城网址8722 版权所有 备案号：京ICP备2021012129号-3
